Content Previous Next

PRTG Manual: HPE 3PAR Common Provisioning Group Sensor

<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: HPE 3PAR Common Provisioning Group Sensor

The HPE 3PAR Common Provisioning Group sensor monitors the capacity of a Common Provisioning Group (CPG) on an HPE 3PAR storage system.

HPE 3PAR Common Provisioning Group Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: HPE 3PAR Common Provisioning Group
French: HPE 3PAR groupe de provisionnement commun
German: HPE 3PAR Common Provisioning-Gruppe
Japanese: HPE 3PAR 共通プロビジョニンググループ
Portuguese: Grupo de provisionamento comum do HPE 3PAR
Russian: Общая группа подготовки HPE 3PAR
Simplified Chinese: HPE 3PAR 通用配置群组
Spanish: Grupo de suministro común HPE 3PAR

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
Credentials	This sensor requires credentials for HPE 3PAR.
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a very low performance impact.
Lookups	This sensor uses lookups to determine the status values of one or more channels.
Scanning interval	The minimum scanning interval of this sensor is 1 minute. The recommended scanning interval of this sensor is 5 minutes.
Multi-platform probe	You can add this sensor to a multi-platform probe.
Knowledge Base	Knowledge Base: Where can I find the Web Services API (WSAPI) port for the connection to the HPE 3PAR system?

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

cpg
hpe
hpe3par
rest

For more information about basic sensor settings, see section Sensor Settings.

HPE 3PAR Specific

Setting	Description
Name	The name of the CPG that this sensor monitors.
ID	The ID of the CPG that this sensor monitors.
Virtual Domain	The virtual domain to which the CPG that this sensor monitors belongs.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Debug Options

Setting	Description
Result Handling	Define what PRTG does with the sensor result: Discard result (default): Do not store the sensor result. Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval. This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance. In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Setting

Description

Result Handling

Define what PRTG does with the sensor result:

Discard result (default): Do not store the sensor result.

Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval.

This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance.

In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Logical Space Free	The free logical space
Logical Space Free %	The free logical space (%)
Logical Space Total	The allocated logical space
Logical Space Used	The space that is already in use
Snapshot Space Free	The free snapshot space
Snapshot Space Free %	The free snapshot space (%)
Snapshot Space Total	The allocated snapshot space
Snapshot Space Used	The snapshot space that is already in use
State	The CPG status Up status: Normal Warning status: Degraded Down status: Failed Unknown status: Unknown This channel is the primary channel by default.
User Space Free	The free user space
User Space Free %	The free user space (%)
User Space Total	The allocated user space
User Space Used	The user space that is already in use

KNOWLEDGE BASE

Where can I find the Web Services API (WSAPI) port for the connection to the HPE 3PAR system?

https://kb.paessler.com/en/topic/89717

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108