<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: VMware Host Performance (SOAP) Sensor

Performance impact

• This sensor has a very high performance impact. We recommend that you use no more than 50 of this sensor on each probe.

.NET 4.7.2 or later

• This sensor requires .NET 4.7.2 or later from Microsoft on the probe system. In a cluster, install it on every cluster node.

If the framework is missing, you cannot create this sensor.

For more information, see the Knowledge Base: Which .NET version does PRTG require?

Windows Server

• We recommend Windows Server 2016 on the probe system for best performance of this sensor.

Parent device

• This sensor requires that the parent device is a VMware ESXi server as of version 5.2. We recommend that you do not use this sensor on your vCenter. Reliable hardware information can only be provided when this sensor is created on your physical host server as parent device.

Credentials

• This sensor requires credentials for VMware/XenServer in the settings of the parent device. Enter a user with sufficient access rights to obtain statistics (read-only usually works).

IPv6

• This sensor supports IPv6.

Knowledge Base

• Knowledge Base: I cannot add VMware sensors because of "wrong" password although it is correct. What can I do?

• Knowledge Base: Why are my VMware sensors not working after upgrading to VCSA 6.5 U1?

Managed Object Identifier (MOID)

The managed object identifier of the host that this sensor monitors.

Result Handling

Define what PRTG does with the sensor result:

• Discard result (default): Do not store the sensor result.

• Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file names are Result of Sensor [ID].txt and Result of Sensor [ID].Data.txt. This setting is for debugging purposes. PRTG overwrites these files with each scanning interval.

This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance.

In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

• Show channels independently (default): Show a graph for each channel.
• Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
  You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

CPU Ready (Percent)

The CPU readiness (%)

CPU Usage

The CPU usage

This channel is the primary channel by default.

Datastore Total ReadLatency

The datastore total read latency

Datastore Total WriteLatency

The datastore total write latency

Disk Read

The disk read speed

Disk Usage

The disk usage

Disk Write

The disk write speed

Disk.DeviceLatency

The disk device latency

Disk.KernelLatency

The disk kernel latency

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status

Memory Active

The active memory

Memory Consumed

The consumed memory

Memory Consumed (Percent)

The memory consumed (%)

Memory Swap Used

The used memory swap

Network Received

The received bytes

Network Transmitted

The transmitted bytes

Network Usage

The total network usage

Power

The average host power usage